- Comprehensive EMC shielding
- Supports one single-size PMC site in 4HP width
- Up to 64-bit/66 MHz CompactPCI® Interface
MIC-3953
The MIC-3953 is a 3U CompactPCI carrier board for PCI Mezzanine Cards (PMC) modules. It provides one 32,64-bit/33,66 MHz PMC site in 4HP width for system expansion through different PMC modules. Advantech provides several PMC modules that work with MIC-3953, such as the 10/100 Ethernet module and Gigabit module. It is also compatible with other standardized modules from other manufacturers.
Related Products
MIC-3396
Using Intel’s 4th generation core i3/i5/i7 processors based on 22nm process technology supporting up to four cores / eight threads at 2.4GHz and 6MB last level cache, the MIC-3396 blade boosts computing performance deploying the latest virtualization, techniques and CPU enhancements. Onboard soldered low voltage DRAM (1.35V) with ECC support and optional memory expansion via an SODIMM socket extend the memory to maximum of 16GB supporting the most demanding applications in high performance or virtualized environments. Dual channel design and memory speeds up to 1600MT/s along with increased cache size and cache algorithms guarantee maximum memory performance.
Combined with the powerful Intel® QM87 chipset, the 4th generation Core™ processors offer improved I/O performance by leveraging 5GT/s DMI and 3rd generation PCIe interfaces. An onboard XMC/PMC site with PCIe x8 gen.3 connectivity can host high speed offload or I/O mezzanines such as the MIC-3666 dual 10GE XMC card. With SATA-III support and up to 7Gbps I/O. the latest enhancements in storage technology such as high speed SSDs or traditional HDDs can be used on the MIC-3396. Five Gigabit Ethernet ports based on Intel’s latest GbE controllers for PICMG 2.16, front and rear connectivity ensure best in class network connectivity.
The processor’s integrated enhanced graphics engine (Iris) offers twice the performance over previous generations. With triple independent display support, the MIC-3396 is an ideal fit for demanding workstation applications.
RASUM features integrated in the CPU and chipset combined with PICMG 2.9, IPMI-based management make the MIC-3396 a highly available and reliable computing engine.
The RIO-3316 RTM module supports one PS/2 connector with both keyboard and mouse ports, one USB 3.0, two USB 2.0 ports, two RS-232 ports, two SATA ports, two DVI ports, and two Gigabit Ethernet ports. In case of the SATA disk drives and SATA RAID support of the QM87 do not meet performance and reliability requirements, the RIO-3315 SAS version supports a 4-port SAS controller with RAID and fail over support.
MIC-3398
The MIC-3398 is a Low-Power 6U CompactPCI® CPU blade with best in class price/performance ratio tailored for applications that require a state of the art processor platform based on Intel Architecture with full IO capability at an attractive cost point.
The MIC-3398 supports Intel® Atom™ E3845 and Celeron N2930, J1900 SoC (system on a chip) family previously codenamed Bay trail with a maximum of quad-core 2.00 GHz processing performance.
Intel’s latest Atom™ technology provides significant increases in performance and energy efficiency by using the latest 22nm Intel manufacturing process making it an ideal choice for control and workstation applications that require passive cooling with a power dissipation as low as 10W for the MIC-3398 board.
Up to 8GB, dual channel 1333 MHz DDR3L memory with ECC support provide a high performance and robust memory interface for demanding applications. With built-in graphics based on Intel’s® HD Graphics Technology this blade offers a significant improvement in graphics performance compared to previous generation platforms. Support for an onboard 2.5” SATA-II drive as well as CFast SSDs adds comprehensive mass storage support.
On the system side, the MIC-3398 supports 32-bit, 33MHz and 64-bit, 66MHz PCI bus interfaces to a CompactPCI backplane with support for Drone Mode operation.
A rich set of I/O interfaces such as DVI-D, USB3.0/2.0, Gigabit Ethernet and RS-232/422/485 ports round off the feature set. In addition to the single slot wide (4HP) board offering, a dual slot wide (8HP) version of the blade offers additional network connectivity by increasing Gigabit Ethernet port count from two to four.
CP3010-SA
design is based on Atom™ technology, performance levels of former Core™ 2 Duo platforms can be reached.
Further, the built-in graphics core now features Intel® HD Graphics Technology offering an outstanding increase in graphics performance compared to previous Atom™ designs.
Memory demanding applications can make use of up to 8GB soldered DDR3L running at 1333MHz. For onboard data storage the CP3010-SA offers a CFAST option or a soldered SATA Flash and a HDD/SSD option on the 8HP extension module.
MIC-3395MIL
Using Intel’s 3rd generation core i7 ULV processors, it offers a low power dissipation design without the need of on-board forced ventilation. Ruggedized requirements are addressed by a condition cooled design an extended operation temperature range (-40° C ~ 70° C). Shock and vibration resistances of the board are increased by using wedge locks and a single-piece CNC-milled aluminum alloy plate that conforms to the major IC packages. With highly integrated functional capabilities, the MIC-3395MIL fully utilizes the I/O features of the Intel chipsets. It supports maximum 16GB of 1600 MHz DDR3 RAM, an onboard 2.5” Serial ATA HDD or SSD, a CFast slot, an onboard NAND flash (as optional), and a set of I/O functions brought through the backplane to a unique rear transition module, which contains two/four LAN ports, two DVI ports, two USB 2.0, one P/S2 port and one RS-232 port on the front panel.