The MIC-3955 is a 3U CompactPCI 4-port RS-232/422/485 Communication Card. It supports working with 32bit 33MHz or 66MHz PCI frequency
The MIC-3398 is a Low-Power 6U CompactPCI® CPU blade with best in class price/performance ratio tailored for applications that require a state of the art processor platform based on Intel Architecture with full IO capability at an attractive cost point.
The MIC-3398 supports Intel® Atom™ E3845 and Celeron N2930, J1900 SoC (system on a chip) family previously codenamed Bay trail with a maximum of quad-core 2.00 GHz processing performance.
Intel’s latest Atom™ technology provides significant increases in performance and energy efficiency by using the latest 22nm Intel manufacturing process making it an ideal choice for control and workstation applications that require passive cooling with a power dissipation as low as 10W for the MIC-3398 board.
Up to 8GB, dual channel 1333 MHz DDR3L memory with ECC support provide a high performance and robust memory interface for demanding applications. With built-in graphics based on Intel’s® HD Graphics Technology this blade offers a significant improvement in graphics performance compared to previous generation platforms. Support for an onboard 2.5” SATA-II drive as well as CFast SSDs adds comprehensive mass storage support.
On the system side, the MIC-3398 supports 32-bit, 33MHz and 64-bit, 66MHz PCI bus interfaces to a CompactPCI backplane with support for Drone Mode operation.
A rich set of I/O interfaces such as DVI-D, USB3.0/2.0, Gigabit Ethernet and RS-232/422/485 ports round off the feature set. In addition to the single slot wide (4HP) board offering, a dual slot wide (8HP) version of the blade offers additional network connectivity by increasing Gigabit Ethernet port count from two to four.
Advantech’s MIC-3397 series is a 6U CompactPCI single board computer with server class processor of Intel® Quad-Core Xeon® E3-1125C v2(40W) and low power dissipation processor of Intel® Dual-Core Pentium® B925C(15W) ,with DH8900 chipset supports DMI1.0 x 4 FSB. The processor using Intel® 22nm 64 bit process technology, up to 2.5GHz clock speed, 8MB L3 cache featured with Intel® Hyper-Threading, Virtualization, Trusted Execution Technology, enable the board meet the highest standards for the management and security of high-availability applications. It supports dual channel ECC memory, up to 16GB DDR3 of 1333/1600 MHz with max 8G on board and 8G SO-DIMM memory, three 2.5” Serial ATA interfaces (one on board optional with one 8 GB NAND flash, two to RTM),one Cfast slot, five Gigabit Ethernet ports( two on front panel, two to PCIMG2.16, two to RTM with one optional with front panel), six USB2.0 ports (three on front panel, three to RTM), two VGA ports (one on front panel, one to RTM) on 4HP, three COM ports (one to front panel, two to RTM), one PS/2 port, and one PCIe2.0 x4 interface reserved for user define to rear transition module.
MIC-3397, designed in single slot (4HP) and dual slots (8HP) form factor widths features. The 8HP version provides extensive & rich IO support, is featured with a high-performance discrete graphics, using AMD Radeon E6760 GPU, supports 1GB GDDR5 at PCIe x1, x2, x4, x8, and x16 lane widths, 2.5 GT/s and 5.0 GT/s link-data rates, up to four display outputs including one DVI-I, one DVI-D port and two DP 1.1or 1.2 port in a MXM 3.0 type A form factor.
MIC-3397 Series can be installed in a standard CompactPCI system slot as system master, or peripheral slot as stand-alone server blade without CompactPCI bus communication, it meets the harsh environment application, to make board attractive to multiple markets which is ideally suited for datacom, telecom and military applications, its outstanding graphics design will bring more opportunities for image-processing in medical, defense system and many other vertical segments applications.
High Versatility with Low Power Consumption
Memory demanding applications can make use of up to 8GB soldered DDR3L running at 1333MHz. For onboard data storage the CP3010-SA offers a CFAST option or a soldered SATA Flash and a HDD/SSD option on the 8HP extension module.
The MIC-3953 is a 3U CompactPCI carrier board for PCI Mezzanine Cards (PMC) modules. It provides one 32,64-bit/33,66 MHz PMC site in 4HP width for system expansion through different PMC modules. Advantech provides several PMC modules that work with MIC-3953, such as the 10/100 Ethernet module and Gigabit module. It is also compatible with other standardized modules from other manufacturers.
