The MIC-3398 is a Low-Power 6U CompactPCI® CPU blade with best in class price/performance ratio tailored for applications that require a state of the art processor platform based on Intel Architecture with full IO capability at an attractive cost point.
The MIC-3398 supports Intel® Atom™ E3845 and Celeron N2930, J1900 SoC (system on a chip) family previously codenamed Bay trail with a maximum of quad-core 2.00 GHz processing performance.
Intel’s latest Atom™ technology provides significant increases in performance and energy efficiency by using the latest 22nm Intel manufacturing process making it an ideal choice for control and workstation applications that require passive cooling with a power dissipation as low as 10W for the MIC-3398 board.
Up to 8GB, dual channel 1333 MHz DDR3L memory with ECC support provide a high performance and robust memory interface for demanding applications. With built-in graphics based on Intel’s® HD Graphics Technology this blade offers a significant improvement in graphics performance compared to previous generation platforms. Support for an onboard 2.5” SATA-II drive as well as CFast SSDs adds comprehensive mass storage support.
On the system side, the MIC-3398 supports 32-bit, 33MHz and 64-bit, 66MHz PCI bus interfaces to a CompactPCI backplane with support for Drone Mode operation.
A rich set of I/O interfaces such as DVI-D, USB3.0/2.0, Gigabit Ethernet and RS-232/422/485 ports round off the feature set. In addition to the single slot wide (4HP) board offering, a dual slot wide (8HP) version of the blade offers additional network connectivity by increasing Gigabit Ethernet port count from two to four.
Highest Performance, Best Technology, 10GbE on backplane
Based on the successful CP6004-SA 6U CompactPCI processor board available with Third Generation Intel® Core™ Quad Core processors, the CP6004X-SA is based on existing standards and provides two additional 10Gigabit/sec Ethernet ports and PCIe 2.0 x4 to the backplane based on the PICMG2.20 specification.
This CP6004X-SA design is made for highest data throughput, where performance and ruggedization on a scaleable platform is required.
The quad core processor enables virtualization and multithreading applications to run in full 64-bit mode using Enhanced Intel® Virtualization, Intel® HD Graphics, and Intel® Turbo Boost Technology.
The CP6004X-SA provides hot swap, IPMI (Intelligent Platform Management Interface), optional TPM (Trusted Platform Module 1.2) support, and meets the highest standards for the management and security of high-availability applications.
This makes this board exceptionally attractive to multiple markets, including highly sensitive, security-relevant telecom and datacom applications and, thanks to its robust construction, is also ideal for image-processing systems in medical and defense systems, among many other vertical segments.
Backplane and system solutions with highest data throughput will also be available at Kontron.
The MIC-3954 is a rugged single Eurocard CompactPCI® Serial carrier board with two function options; Option 1: Supports the PCI Express® Mini Card, which offers two standard PCI Express® Mini Card slots, with dual on-board SIM slots for 3G module. It allows to use all types of cards for HF applications, for example GPS, WLAN, UMTS, GSM, or HSDPA which is connected to two external SMA antenna connectors; Option 2: Supports the hard disk drive carrier board and one USB connector on front panel. It is designed to carry a 2.5″ SATA hard disk drive or a solid state drive.
Highest Quad / Dual Core Performance in 22nm Technology for Harsh Environments
The CP6004-RA/RC, a CompactPCI PICMG 2.16 compliant 6U CPU board, comes with various rugged levels, making it yet another addition to Kontron’s rugged PICMG 2.16 portfolio.
Based on the Intel® Core™ i7 third generation processor and the QM77 platform controller hub, the CP6004-RA/RC is featured by dual or quad core computing performance at a reasonable thermal design power, including a complete set of data, communication and multimedia interfaces.
The CP6004-RA version is designed for harsh application requirements in air-cooled environments, where the CP6004-RC is made for conduction cooled environments.
With the 2.1 GHz Intel® Core™ i7-3612QE and the LV 2.5 GHz Intel® Core™i7-3555LE, the CP6004-RA/RC has extraordinary performance per watt values. Up to 16 GByte of soldered DDR3 1600 MHz memory with ECC provide the foundation of demanding software applications.
Based on the Intel® Mobile QM77 I/O controller hub the CP6004-RA/RC provides high graphics performance for VGA and two independent digital video outputs to the rear I/O as well as HDA audio capabilities.
Besides the outstanding graphics performance, the CP6004-RA/RC offers comprehensive I/O capability with up to 5x 1Gb Ethernet, 4 x rear I/O SATA with RAID 0/1/5/10 functionality, a local SATA Flash disk connector, as well as 6x USB 2.0, 2 x COM.
It can also accommodate a conduction cooled PMC/XMC slot for I/O intensive applications.
The board provides safety and security via an optional trusted platform module, (TPM 1.2), two redundant firmware hubs (failover) and IPMI support according PICMG 2.9 R1.0.
If you need more information about sytems or PMC/XMC modules, please follow the links systems or PMC/XMC
Experience true server class performance on CompactPCI. Using Intel® 45nm 64-bit Xeon technology with up to four Cores at 2.33 GHz combined with the powerful Intel® 5100MCH/ ICH9R chipset, the MIC-3393 blade boosts computing and I/O performance deploying the latest virtualization, multi-threading and I/OAT acceleration techniques. Enhanced Xeon® packaging, front side bus parity, onboard, soldered DRAM with ECC support and RASUM features integrated in the 5100 MCH combined with PICMG2.9, IPMI-based management make the MIC-3393 a highly available and reliable high performance computing engine. The comprehensive I/O subsystem includes a 2.5″ SATA HDD or CompactFlash slot, three advanced Gigabit Ethernet controllers, two UARTs, USB ports and a TPM. The addition of PCIe links to the RTM further enhances versatility compared to previous generation blades resulting in best-in-class connectivity.
MIC-3395MIL, a CompactPCI PICMG2.16 compliant single slot 6U CPU board, offers with two different configurations that meet a wide range of environmental requirements for ruggedized application.
Using Intel’s 3rd generation core i7 ULV processors, it offers a low power dissipation design without the need of on-board forced ventilation. Ruggedized requirements are addressed by a condition cooled design an extended operation temperature range (-40° C ~ 70° C). Shock and vibration resistances of the board are increased by using wedge locks and a single-piece CNC-milled aluminum alloy plate that conforms to the major IC packages. With highly integrated functional capabilities, the MIC-3395MIL fully utilizes the I/O features of the Intel chipsets. It supports maximum 16GB of 1600 MHz DDR3 RAM, an onboard 2.5” Serial ATA HDD or SSD, a CFast slot, an onboard NAND flash (as optional), and a set of I/O functions brought through the backplane to a unique rear transition module, which contains two/four LAN ports, two DVI ports, two USB 2.0, one P/S2 port and one RS-232 port on the front panel.
The CP3210 is the latest addition to Kontron’s rugged
3U CompactPCI portfolio.
With a faster clock rate of 733 MHz, accelerated DDR SDRAM (266 MHz + 33.3 %) double the amount of system and user Flash and a Gigabit Ethernet port for faster data throughput and overall greater system performance, the Kontron CP3210 CompactPCI® CPU board is an enhanced version of the highly reliable and powerful Kontron PowerEngineC7, a proven solution already embedded in major defense programs.
Lear more: Rugged & COTS Technologies.
Esta web utiliza cookies propias y de terceros para analizar su navegación y ofrecerle un servicio más personalizado acorde a sus intereses. Continuar navegando implica la aceptación de nuestra Política de Cookies.