- PICMG CPCI-S.0 CompactPCI® Serial
- For card 2 with SATA interface
- For card 1 with internal PCIe and USB interface
MIC-3954
Related Products
MIC-3953
The MIC-3953 is a 3U CompactPCI carrier board for PCI Mezzanine Cards (PMC) modules. It provides one 32,64-bit/33,66 MHz PMC site in 4HP width for system expansion through different PMC modules. Advantech provides several PMC modules that work with MIC-3953, such as the 10/100 Ethernet module and Gigabit module. It is also compatible with other standardized modules from other manufacturers.
MIC-3393
MIC-3398
The MIC-3398 is a Low-Power 6U CompactPCI® CPU blade with best in class price/performance ratio tailored for applications that require a state of the art processor platform based on Intel Architecture with full IO capability at an attractive cost point.
The MIC-3398 supports Intel® Atom™ E3845 and Celeron N2930, J1900 SoC (system on a chip) family previously codenamed Bay trail with a maximum of quad-core 2.00 GHz processing performance.
Intel’s latest Atom™ technology provides significant increases in performance and energy efficiency by using the latest 22nm Intel manufacturing process making it an ideal choice for control and workstation applications that require passive cooling with a power dissipation as low as 10W for the MIC-3398 board.
Up to 8GB, dual channel 1333 MHz DDR3L memory with ECC support provide a high performance and robust memory interface for demanding applications. With built-in graphics based on Intel’s® HD Graphics Technology this blade offers a significant improvement in graphics performance compared to previous generation platforms. Support for an onboard 2.5” SATA-II drive as well as CFast SSDs adds comprehensive mass storage support.
On the system side, the MIC-3398 supports 32-bit, 33MHz and 64-bit, 66MHz PCI bus interfaces to a CompactPCI backplane with support for Drone Mode operation.
A rich set of I/O interfaces such as DVI-D, USB3.0/2.0, Gigabit Ethernet and RS-232/422/485 ports round off the feature set. In addition to the single slot wide (4HP) board offering, a dual slot wide (8HP) version of the blade offers additional network connectivity by increasing Gigabit Ethernet port count from two to four.
CP6004-RA_RC
Highest Quad / Dual Core Performance in 22nm Technology for Harsh Environments
Based on the Intel® Core™ i7 third generation processor and the QM77 platform controller hub, the CP6004-RA/RC is featured by dual or quad core computing performance at a reasonable thermal design power, including a complete set of data, communication and multimedia interfaces.
The CP6004-RA version is designed for harsh application requirements in air-cooled environments, where the CP6004-RC is made for conduction cooled environments.
With the 2.1 GHz Intel® Core™ i7-3612QE and the LV 2.5 GHz Intel® Core™i7-3555LE, the CP6004-RA/RC has extraordinary performance per watt values. Up to 16 GByte of soldered DDR3 1600 MHz memory with ECC provide the foundation of demanding software applications.
Based on the Intel® Mobile QM77 I/O controller hub the CP6004-RA/RC provides high graphics performance for VGA and two independent digital video outputs to the rear I/O as well as HDA audio capabilities.
Besides the outstanding graphics performance, the CP6004-RA/RC offers comprehensive I/O capability with up to 5x 1Gb Ethernet, 4 x rear I/O SATA with RAID 0/1/5/10 functionality, a local SATA Flash disk connector, as well as 6x USB 2.0, 2 x COM.
It can also accommodate a conduction cooled PMC/XMC slot for I/O intensive applications.
The board provides safety and security via an optional trusted platform module, (TPM 1.2), two redundant firmware hubs (failover) and IPMI support according PICMG 2.9 R1.0.
If you need more information about sytems or PMC/XMC modules, please follow the links systems or PMC/XMC
CP3010-SA
design is based on Atom™ technology, performance levels of former Core™ 2 Duo platforms can be reached.
Further, the built-in graphics core now features Intel® HD Graphics Technology offering an outstanding increase in graphics performance compared to previous Atom™ designs.
Memory demanding applications can make use of up to 8GB soldered DDR3L running at 1333MHz. For onboard data storage the CP3010-SA offers a CFAST option or a soldered SATA Flash and a HDD/SSD option on the 8HP extension module.
CP6004X-SA
Highest Performance, Best Technology, 10GbE on backplane
This CP6004X-SA design is made for highest data throughput, where performance and ruggedization on a scaleable platform is required.
The quad core processor enables virtualization and multithreading applications to run in full 64-bit mode using Enhanced Intel® Virtualization, Intel® HD Graphics, and Intel® Turbo Boost Technology.
The CP6004X-SA provides hot swap, IPMI (Intelligent Platform Management Interface), optional TPM (Trusted Platform Module 1.2) support, and meets the highest standards for the management and security of high-availability applications.
This makes this board exceptionally attractive to multiple markets, including highly sensitive, security-relevant telecom and datacom applications and, thanks to its robust construction, is also ideal for image-processing systems in medical and defense systems, among many other vertical segments.
Backplane and system solutions with highest data throughput will also be available at Kontron.