16-ch Digital Output Modules
- Channels: 16
- Operating voltage: 30 Vmax
- Digital output: Open collector to 30 V, 100 mA max. load
- Power consumption: 0.25 W (typical); 0.53 W (max.)
- Power dissipation: 300 mW for each channel
ADAM-5056
The ADAM-5056 features sixteen digital output channels. The digital outputs are open-collector transistor switches that you can control from the ADAM-5000 main unit. You also can use the switches to control solid-state relays.
Related Products
ADAM-5052
ADAM-5052
The ADAM-5052 provides eight fully independent isolated channels. All channel designed with 5000 VRMS isolation to prevent ground loop effects and the damage from power surges on the input lines.
ADAM-5050
ADAM-5050
The ADAM-5050 features sixteen digital input/output channels. Each channel can be independently configured to be an input or an output channel by the setting of its DIP switch. The digital outputs are open-collector transistor switches that can be controlled from the ADAM-5000. The switches can also be used to control solid-state relays, which in turn can control heaters, pumps and power equipment. The ADAM-5000 can use the module’s digital inputs to determine the state of limit or safety switches, or to receive remote digital signals.
ADAM-5060
ADAM-5060
The ADAM-5060 relay output module is a low-cost alternative to SSR modules. It provides 6 relay channels, two of Form A and four of Form C.
ADAM-5069
ADAM-5069
ADAM-5069 is designed for on/off control in high-voltage applications. The major feature of ADAM-5069 is the power relay rating at 240 V AC and 5 A. This range can satisfy most requirements for driving externally controlled devices such as lights, fans, alarm systems, and various electronic devices in industrial automation, security, building and home automation applications. ADAM-5069 provides a jumper setting for output values. This jumper can be set to clear or keep output values when reset. To easily identify the module’s status, it has been designed with 8 LED indicators. It also provides eight form A channels, and when combined with selected controllers, it will provide the Modbus/RTU protocol for standard communication requirements.
