PB-DIN2

12 CHANNEL OPTOISOLATED DIGITAL INPUT MODPACK
  • 12 independent optoisolated digital input channels
  • Input Voltage Range: 12V DC to +80V DC
  • Input Current: 4.2mA (per switched input)
  • Input Frequency: 20kHz (max.)
  • Switching Level: <5v >10V = high
  • Switching Char.: ton = 25μs, toff = 11μs
DATASHEET
PIDE PRESUPUESTO

A 12 channel industrial I/O piggyback for use with dedicated carrier boards for high-voltage operation.
Each of the 12 inputs are independent of each other requiring neither common GND nor common Vcc connections and possess 2500V DC isolation between the input and system
ground and 100V DC between individual inputs.

Related Products

PB-DAC3

PB-DAC3

The PB-DAC3 is a 4 channel 12-bit opto-isolated D/A piggyback for use with ModPack carrier boards. All outputs are independent and galvanically isolated from the system supply. Bipolar or unipolar conversion is indicated by the version being ordered. Board specific calibration data remain stored in an on-board EEPROM for software gain/offset correction. The PB-DAC3 has software support for both OS9 and VxWorks.

Categoría: .
VMOD-2(D)

VMOD-2(D)

Providing up to 2 ModPack interface in a 3U form factor, the VMOD-2(D) caters for the need of most industrial applications.

Categoría: .
V2PMC2

V2PMC2

The V2PMC2 PCI-X/PMC carrier card is a 6U VME that holds up to two single-width or one double-width PCI-X/PMC modules.
The V2PMC2 works in association with a PCI-Express host which is connected to it through a x4 PCI-Express serial link onto P0 connector.

Categoría: .
PB-ADC3

PB-ADC3

An 8 channel 12-bit opto-isolated A/D piggyback for use with ModPack carrier boards. All inputs are differential and galvanically isolated. Bipolar or unipolar conversion as well as the choice between voltage or current conversion is indicated by the version being ordered. Board specific calibration data remain stored in an on-board EEPROM for software gain/offset correction. The PB-ADC3 is supported under both OS9 and
VxWorks.

Categoría: .
VSBC-32

VSBC-32

A VMEbus single-board computer incorporating the 32-bit
MC68(EN)360 high-performance QUad-channel Integrated Communications Controller (QUICC).

Categoría: .
VM6250

VM6250

The 6U VME PowerPC VM6250 is designed for state-of-the-art applications requiring real-time data and signal processing, including sonar, radar, medical imaging and machine vision systems.
Learn more: Rugged & COTS Technologies

Categoría: .
VM6054

VM6054

The VM6054 6U VME 2eSST Single Board Computer is built around Intel®’s state-of-the-art 3rd Generation Core™ i7 quad-core processor.
The VM6054 provides exceptional I/O capabilities onboard and outstanding flexibility by providing support for PMC and XMC including flexible I/O, storage mezzanines, and personality modules.
Accessory cards such as VME 6U dual PMC carrier and rear transition module complete the ecosystem.
Users of PENTXM2, PENTXM4 and VM6050 will find the same front and rear interfaces, making VM6054 the perfect replacement, and investment preservation with Kontron products an actual experience already spanning a decade.

Categoría: .
VM6050

VM6050

The VM6050 is built around Intel®’s state of-the-art Core™
i7 dual-core processor. The VM6050 provides exceptional I/O
capabilities onboard and outstanding flexibility by providing
support for both PMC, XMC and FMC mezzanine cards.
The VM6050’s VME interface helps customers preserve their
investment in legacy VME equipment.

Categoría: .