MIC-3325

3U CompactPCI® Intel® AtomTM Dual Core D525/N455 Processor Blade
  • Dual Core Intel® AtomTM D525 processor/single core N455 processor
  • Intel® I/O Controller Hub 8-Mobile (ICH8M)
  • Two GB DDR3 onboard up to 800 MT/s
  • Optimized CompactFlash socket on single board computer
  • 2.5″ SATA-II HDD on XTM second layer
  • Two 10/100/1000 Mbps ports, two USB ports, one VGA port on front panel
  • Two COM ports, one USB ports, one PS/2 port on 8HP second layer
  • Support 5V only power input
  • PICMG 2.0, R 3.0, PICMG 2.1, R 2.0 compliant
DATASHEET
PIDE PRESUPUESTO

Advantech’s MIC-3325 is a 3U CompactPCI dual/single core processor blade based on the Intel® Atom™ processor D525/N455 ICH8M two-chip platform. It provides the high performance of 2 cores and 4 threads of processing power at lower cost, and with easier validation. The MIC-3325 fully utilizes the I/O features of the Intel® chipsets, including an integrated memory controller (IMC), integrated graphics processing unit (GPU) and integrated I/O (IIO) such as DMI. The low power requirements of the Intel® Atom™ processor makes operation in elevated temperature ranges possible. Breakthrough memory design puts 2GB SDRAM on board, while keeping the speed at DDR3 800MT/s. The on-board CPU and memory provide less weight and higher shock/vibration resistance than socket devices. With such benefits, the MIC-3325 can be used in mission-critical applications such as military defense, transportation, traffic control, test and measurement (T&M) as well as critical data acquisition & control applications. MIC-3325 uses the Intel® ICH8M as the PCH, which provides extensive I/O support. The Integrated Gigabit Ethernet Controller can operate at multiple speeds (10/100/1000 Mb/s) and in either full duplex or half duplex mode. A flexible 8HP extension module design provides the MIC-3325 with great flexibility and additional I/O connectivity to the customer. For more connectivity details, please contact an Advantech representative.

Related Products

MIC-3326

MIC-3326
Advantech’s MIC-3326 is a 3U CompactPCI single core processor blade based on the Intel® Atom™ N455 ICH8M two-chip platform. It provides the low power and cost-effective performance, and with easier validation. The MIC-3326 fully utilizes the I/O features of the Intel® chipsets, including an integrated memory controller (IMC), integrated graphics processing unit (GPU) and integrated I/O (IIO) such as DMI. The low power requirements of the Intel® Atom™ processor makes operation in elevated temperature ranges possible. Breakthrough memory design puts up to 2GB SDRAM on board, while keeping the speed at DDR3 800MT/s. The direct-soldered CPU and memory provide less weight and higher shock/vibration resistance than socket devices. With such benefits, the MIC-3326 can be used in mission-critical applications such as energy, transportation, traffic control, test and measurement (T&M) as well as critical data acquisition & control applications.

MIC-3326 uses the Intel ICH8M as the PCH, which provides extensive I/O support. The Integrated Gigabit Ethernet Controller can operate at multiple speeds (10/100/1000 Mb/s) and in either full duplex or half duplex mode. A flexible 8HP extension module design provides the MIC-3326 with great flexibility and additional I/O connectivity to the customer. For more connectivity details, please contact an Advantech representative.

Categoría: .
Etiqueta: .
MIC-3329

MIC-3329

Advantech MIC-3329 Series, using Intel® latest 22 nm Atom™ technology (code name: Baytrail) to provide significant performance and power efficiency.

MIC-3329 series, as a 3U CompactPCI® processor blade, is featured with a dual-core E3827 and quad-core E3845 ATOM SoC processors, up to 4GB soldered DDR3L-1066/1333 ECC memory. It is available in single and dual slots width form factor, to offer various I/O functionalities by XTM (8HP) & Rear IO extensions. Front panel I/O on the single slot (4HP) provides 2 x RJ45 GbE ports (Switchable with RIO 4HP),1 x VGA port (Switchable with RIO 4HP), 1 x USB2.0 port and 1 x USB3.0 port. Front panel I/O on the second layer (XTM) provides 2 x COM ports (RS232/422/485), 1 x PS/2 KB/MS and 1 x Audio ports. There are three types of storage device available such as on board 8GB SSD flash on 4HP (optional) or a Cfast socket on RIO 4HP, Cfast socket or 2.5″ on board SATA drive on the front second layer.

MIC-3329 provides an ideal solution for transportation, railway and factory automation application. By using robust design on board layout & thermal, it is available to meet or exceed EN50155 and EN50121-4; With a very low TDP selection of processor such as 8W/10W, its low power consumption and industrial SoC features make MIC-3329 perfect fit for all fanless system applications.

Categoría: .
Etiqueta: .
MIC-3328

MIC-3328

Advantech’s MIC-3328 is a 3U CompactPCI PlusIO CPU blade based on the Intel® 3rd generation Core™ processor family. Based on latest 22nm process technology these processors support up to four cores / eight threads at up to 2.5GHz and up to 6M last level cache. With Intel HD Graphics(Gen7,DX11,OCL1.1) integrated into the CPU, the MIC-3328 can serve applications demanding high performance, high resolution video output on up to three independent display interfaces. Latest DDR3 DRAM up to 8GB running at 1600MT/s complement the powerful processor with high performance, ECC protected onboard memory.

MIC-3328’s design for reliability like using soldered processor, DRAM and flash storage for enhanced shock and vibration tolerance make it an ideal choice for workstation workloads in harsh environments and mission/business-critical applications such as military, transportation, test & measurement and traffic control. The enhanced fixed point and floating point performance offered by the intel CoreTM processor, improvements in the vector processing instruction set (AVX) along with the possibility to utilize the integrated GPU via standard interfaces such as OpenCL make the MIC-3328 also a great fit for signal processing applications such as radar, beam forming or image processing.

For best in class IO performance, MIC-3328 uses the Intel QM77 PCH, which provides extensive I/O support such as USB3.0, PCI Express gen.2 and SATA-III ports. Three i210 Gigabit Ethernet Controllers provide front panel as well as rear panel network connectivity. The i210 provides higher performance over previous Gigabit Ethernet controllers, better support for virtualization, Energy Efficient Ethernet and ECC protected packet buffers for enhanced reliability. Support for timestampping and synchronization is accomplished via IEEE1588 (PTP). Support for industrial Ethernet protocols such as ProfiNet, EtherCAT and Powerlink is available via third party software partners.
For dense applications the MIC-3328 is available with a 4HP front panel, occupying a single slot, only. For applications requiring additional IO and/or peripheral support, the MIC-3328 can be extended to 8HP (2 slots) via specific extension modules (XTMs). For industrial display or workstation applications, a graphics-centric XTM routes two Display Ports from the PCH for triple display support, adds 2 COM ports for data acquisition and control plus a PS/2 and 2.5″ SSD. A second XTM provides a XMC mezzanine slot for industry standard extension modules like Advantech’s MIC-3666 dual 10GE adapter card. The XMC slot supports a PCI Express x8 interface directly into the Intel CoreTM processor with speeds up to 64Gbps according to PCI Express 3.0.

While support for legacy CompactPCI is provided on J1 via an onboard PI7C9X110 bridge, the MIC-3328 supports an UHM J2 connector according to PCIMG2.30 (PlusIO). While this connector maintains backwards compatibility and interoperability with legacy systems, it makes state of the art serial interfaces such as Gigabit Ethernet, PCI express, USB and SATA available for use on a Rear transition Module (RTM) or on a hybrid backplane supporting legacy IO cards as well as CompactPCI Serial peripheral cards as defined in PICMG2.30. Thus, MIC-3328 provides a smooth, risk free and future proof migration path from legacy parallel PCI bussed CompactPCI system to latest serial interface standard predominant in the computer industry. With full backwards compatibility to CompactPCI, customers investments stay protected while the door is opened for platform enhancements and innovations via the new serial interfaces. The MIC-3328 PlusIO J2 supports interfaces such as 4 PCI Express x1 gen. 2 links for IO extension, one GbE for computer to computer multiprocessing, three SATA for Hard drives and RAID systems as well as 4 USB ports for wireless interfaces and legacy interface replacement.

For more information about CompactPCI PlusIO and Serial offerings from Advantech or information on how this new platform can help you to gain competitive advantages, please contact your Advantech representative.

Categoría: .
Etiqueta: .
CP3004-SA

CP3004-SA

With CP3004-SA, the fifth Generation of Intel® Core™ technology has been made available in Kontron’s CompactPCI product portfolio. The high density design offers extraordinary performance-per-watt values, based on the 14 nanometer technology, and is an ideal backbone for powerful network-intensive applications providing virtualization (VT-X, VT-D) and highest graphics performance. The new-generation graphics controller has up to 40 execution units providing OpenCL 1.2 / OpenGL 4 and triple independent display support. The Intel® Advanced Vector Extensions AVX 2.0 enhancements provide a huge performance improvement in floating-point-intensive computations, which are a key part of digital signal and image processing applications.

CP3004-SA is prepared to be used in demanding and harsh environments, designed according to the shock and vibration requirements of VITA47 EAC3. Extended temperature versions are available. Dual-Core versions (4th gen CPU) provide for low heat dissipation. The processor’s TDP can be adjusted dynamically to a desired performance and power envelope. Typical applications can be found in the markets

► Military/Defence: radar, sonar, general

► Industrial Automation: plant control, machine control

► Energy: demanding environments, cole, oil&gas

► Transportation: long lasting and reliable systems

Long term availability and Kontron’s commitment to a rich CompactPCI portfolio make CP3004-SA a safe investment with low total-cost-of-ownership

Categoría: .
Etiqueta: .